Open‐cage fullerenes as tailor‐made container for a single water molecule

Water is the most important liquid on earth. Clusters of water have been investigated extensively in an effort to understand the bulk property of water. But the behavior of single water molecule without H‐bond has been rarely studied. Open‐cage [60]fullerenes have been shown to trap a single water molecule selectively over molecules with comparable size and act as the smallest “water bottle”. Copyright © 2013 John Wiley & Sons, Ltd.     

Robustly topological mixing of Kan's map

In 1994, I. Kan constructed a smooth map on the annulus admitting two physical measures, whose basins are intermingled. In this paper, we prove that Kan's map is $C^2$ robustly topologically mixing.     

Solution-Based,Anion-Doping of Li4Ti5O12 Nanoflowers for Lithium-Ion Battery Applications

Solution-based, anionic doping represents a convenient strategy with which to improve upon the conductivity of candidate anode materials such as Li₄Ti₅O₁₂ (LTO). As such, novel synthetic hydrothermally-inspired protocols have primarily been devised herein, aimed at the large-scale production of unique halogen-doped, micron-scale, three-dimensional, hierarchical LTO flower-like motifs. Although fluorine (F) doping has been explored, the use of chlorine (Cl) dopants is the primary focus here. Several experimental variables, such as dopant amount, lithium hydroxide concentration, and titanium butoxide purity, were probed and perfected. Furthermore, the Cl doping process did not damage the intrinsic LTO morphology. The analysis, based on interpreting a compilation of SEM, XRD, XPS, and TEM-EDS results, was used to determine an optimized dopant concentration of Cl. Electrochemical tests demonstrated an increased capacity via cycling of 12 % for a Cl-doped sample as compared with pristine LTO. Moreover, the Cl-doped LTO sample described in this study exhibited the highest discharge capacity yet reported at an observed rate of 2C for this material at 143mAh g⁻¹. Overall, these data suggest that the Cl dopant likely enhances not only the ion transport capabilities, but also the overall electrical conductivity of our as-prepared structures. To help explain these favorable findings, theoretical DFT calculations were used to postulate that the electronic conductivity and Li diffusion were likely improved by the presence of increased Ti³⁺ ion concentration coupled with widening of the Li migration channel.     

离子色谱法分析火灾烟气成分的完善

建立了离子色谱法分析火灾烟气成分的方法。样品用去离子水和氢氧化钠溶液配制,采用0.45μm的滤膜过滤2~3次后,配制成样品溶液,稀释适当倍数后进样分析,采用电导检测器进行检测。各阴离子在1.0~50.0mg/L范围内与色谱峰面积均呈现良好的线性关系,相关系数均大于0.999,方法的检出限在0.06~0.1 mg/L之间。方法的加标回收率在86.0%~110%之间,测定结果的相对标准偏差为0.5%~9.0%(n=5)。该方法简便快捷,选择性好,灵敏度高,可满足火灾烟气成分的分析要求。     

Understanding the Origin of Highly Selective CO2 Electroreduction to CO on Ni,N-doped Carbon Catalysts

Ni,N-doped carbon catalysts have shown promising catalytic performance for CO₂ electroreduction (CO₂R) to CO; this activity has often been attributed to the presence of nitrogen-coordinated, single Ni atom active sites. However, experimentally confirming Ni−N bonding and correlating CO₂ reduction (CO₂R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile-derived Ni,N-doped carbon electrocatalysts (Ni-PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO₂R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X-ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square-planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.     

Cephalotanins A–D,Four Norditerpenoids Represent Three Highly Rigid Carbon Skeletons from Cephalotaxus sinensis

Four polycyclic norditerpenoids, cephalotanins A–D ( 1 – 4 ) representing three unprecedented carbon skeletons with highly rigid ring systems, were isolated from Cephalotaxus sinensis and structurally characterized by a combination of various methods. Compounds 1 and 2 are new skeletal norditerpenoid trilactones, while 3 and 4 are two norditerpenoids featuring different new carbon skeletons. Biosynthetic pathways for 1 – 4 were proposed by involving diverse and very fascinating chemical events with the coexisting cephalotane troponoids as the precursors. Compound 1 exhibited good NF‐κB inhibition with an IC₅₀ value of 4.12±0.61 μΜ.     

Highly N/O co-doped ultramicroporous carbons derived from nonporous metal-organic framework for high performance supercapacitors

A new nonporous Zn-based metal-organic framework (NPMOF) synthesized from a high nitrogen-containing rigid ligand was converted into porous carbon materials by direct carbonization without adding additional carbon sources. A series of NPMOF-derived porous carbons with very high N/O contents (24.1% for NPMOF-700, 20.2% for NPMOF-800, 15.1% for NPMOF-900) were prepared by adjusting the pyrolysis temperatures. The NPMOF-800 fabricated electrode exhibits a high capacitance of 220 F/g and extremely large surface area normalized capacitance of 57.7 μF/cm² compared to other reported MOF-derived porous carbon electrodes, which could be attributed to the abundant ultramicroporosity and high N/O co-doping. More importantly, symmetric supercapacitor assembled with the MOF-derived carbon manifests prominent stability, i.e., 99.1% capacitance retention after 10,000 cycles at 1.0 A/g. This simple preparation of MOF-derived porous carbon materials not only finds an application direction for a variety of porous or even nonporous MOFs, but also opens a way for the production of porous carbon materials for superior energy storage.     

A Disulfide Switch Providing Absolute Handedness Control in Double Helices via Conversion from the Antiparallel to Parallel Helical Pattern

A strategy to reversibly switch the parallel/antiparallel helical conformation of aromatic double helices through the formation/breakage of a disulfide bond is presented. Single-crystal X-ray structures, NMR, and circular dichroism spectroscopy demonstrate that the double helices with terminal thiol groups favor an antiparallel helical arrangement both in the solid state and in solution, while the P/M bias of helicity induced by chiral segments from another extremity of the sequence is weak in this structural motif. The antiparallel helices can be rearranged to parallel helices through the disulfide connection of the sequences. This change enhances the bias of helical handedness and results in absolute chirality control of the double helices. The handedness-mediated process can be governed by the oxidation-reduction cycle, thereby switching the structural arrangement and the enhancement of chiral bias. In addition, we find that the sequences can dimerize into an intermolecular double helix with the disulfide connection. And the helical handedness is also fully controlled due to the head-to-head structural motif.     

A hidden rule in metal sulfide fullerenes: A case study of Sc2S@C88

To elucidate the structure of a compound is a necessary step for its practical applications. To study the structure and properties of metal sulfide fullerene Sc₂S@C₈₈ detected by mass spectrometry, 11 194 isomers of C₈₈ and 33 isomers of Sc₂S@C₈₈ were systematically examined by density functional theory calculations. The calculations show that the two lowest‐energy isomers are Sc₂S@C₈₈:81 738 (IPR‐35) and Sc₂S@C₈₈:81 735 (IPR‐32), followed by Sc₂S@C₈₈:81 729 (IPR‐26), Sc₂S@C_88:81 712 (IPR‐9), and Sc₂S@C_88:81 733 (IPR‐30). Structural analysis shows that the first two energetically favored isomers are bridged by the third and fifth energetically favored isomers, which can transfer into each other via direct Stone–Wales rotation. The calculations of temperature effect show that the first two favored isomers become dominant forms of Sc₂S@C₈₈ with decreasing temperature and may coexist in the soot. This structural convertibility among favored isomers of Sc₂S@C₈₈ suggest a hidden rule that birds of a feather flock together in metal sulfide fullerenes. This rule may decrease the range of candidate cages for the structural identification of a metal sulfide fullerene. IR spectra are simulated for helping the future experimental identification of Sc₂S@C₈₈.     

Design of Sensitive Biocompatible Quantum‐Dots Embedded in Mesoporous Silica Microspheres for the Quantitative Immunoassay of Human Immunodeficiency Virus‐1 Antibodies

A novel sandwich‐type electrochemiluminescence (ECL) immunosensor was developed to enable the sensitive detection of HIV‐1 antibodies. This system incorporated mesoporous silica (mSiO₂) complexed with quantum dots (QDs) and nano‐gold particles, which were assembled to enhance signal detection. Magnetic beads were used by immobilizing the secondary anti‐IgG antibody. This was first employed to capture HIV‐1 antibody (Ab) to form a Fe₃O₄/anti‐IgG/Ab complex. A high loading and signal‐enhanced nanocomposite (hereafter referred to as Au‐mSiO₂‐CdTe) was used as a HIV‐1 antigen label. The Au‐mSiO₂‐CdTe nanocomposite was conjugated with the Fe₃O₄/anti‐IgG/Ab complex to form an immunocomplex (hereafter referred to as Fe₃O₄/anti‐IgG/Ab/HIV‐1/CdTe‐mSiO₂‐Au). This complex could be further separated by an external magnetic field to produce ECL signals. Due to the large specific surface area and pore volume of mSiO₂, the loading of the CdTe QDs was markedly increased. Thus, the loaded QDs released a powerful chemiluminescent signal with a concordantly increased sensitivity of the immunosensor. The immunosensor was highly sensitive, and displayed a linear range of responses for HIV‐1 antibody across a dilution range of 1 : 1500 through 1 : 50 with the detection limit of 1 : 4500. The immunoassay can be a promising candidate in early diagnosis of HIV infection.